Безэховая камера, полное соотв. КТ-160Д/РВ6601
The Ares 1F is designed to perform emission and immunity tests on military and aeronautic devices. The design of the structure is optimised for maximum performances, in minimum space. The shielding and its pyramidal absorbers are manufactured by SIEPEL.
|
OUR STRENGTHS |
|
|
MODULAR SHIELDING Self-standing structure up to 18 (40) GHz Steele stiffeners |
|
OPTIMISED ABSORBER LINING Microwave pyramidal absorbers (optimised lining walls and ceiling) Ferrite absorber (full lining of walls and ceiling) |
|
DOOR Single leaf swing door Clearance 0.9 x 2.1 m Manual latching |
|
TEST TABLE Dimensions: 2.5 x 1 x 0.9 m with metallic ground plane and connection stripes |
|
WALL PANELS Penetration panel including coaxial feedthroughs and waveguides |
|
PROJECT REALISATION Project management Technical design & study On-site installation |
|
VENTILATION Honeycomb air vents 300 x 300 mm up to 18 (40) GHz |
|
PERFORMANCE VERIFICATION Shielding effectiveness at 900 MHz at critical locations |
|
POWER DISTRIBUTION Power filter single phase 110/230 V - 32 A - 50/60 Hz Power filter three-phase 400 V - 32 A - 50/60 Hz Electrical package: power distribution, lighting |
AVAILABLE OPTIONS
› Shielded control and amplifier rooms
› Plastic paint for pyramidal absorbers with wide range of colors
› Other types and dimensions of doors
› Electrically-assisted door latching/unlatching
› Antenna positioners
› Floor hatches with connection points
› Additional power filters, data filters and special feedthroughs
› CCTV / Audio monitoring systems
› Fire detection systems
› On request, some measurements can be accredited ISO 17025 (accreditation number 1-6220).
› Automotive / RadioCom standards compliance
› Many other options on demand
|
Номер в Госреестре |
Наименование СИ |
Обозначение типа СИ |
Изготовитель |
Срок свидетельства или заводской номер |
|---|---|---|---|---|
| Не в реестре | ||||
› Compliance & Performances
HY absorbers power handling: 2 kW/m² (CW).
Both absorbers coated with either aqueous or plastic paint are classified ISO class 4 (ISO 14644-1:2015) clean room conditions.
All absorbers batches are tested by SIEPEL for reflectivity performances between 30 MHz – 1000 MHz.
Our raw materials are compliant to RoHS / REACH and free of substances in the current list of Substances of Very High Concern (SVHC) published by the European Chemicals Agency (ECHA).
| DO-160G & MIL-STD-461G | ||
| Measurement distance | 1 m | 1 m |
| Frequency range | 80 MHz - 250 MHz | 250 MHz - 40 GHz |
| Guaranteed performances | < -6 dB | < -10 dB |
| Compliance | Full-compliant | Full-compliant |
SHIELDING EFFECTIVENESS COMPLIES WITH EN 50147-1 (10 kHz - 40 GHz)
› About our absorbers
› Dimensions
|
Total overall including metallic frame |
Internal usable |
| 4.7 x 3.7 x 2.6 m | 3.8 x 2.8 x 2.1 m |
| 15 x 12 x 8 ft | 12 x 9 x 7 ft |
› Quality
Подробные технические характеристики, информация производителя, брошюры:
-
Каталоги производителя:
