Генератор импульсов, сигналов стандартной/произвольной формы и шума Keysight 81150A

Keysight

Генератор импульсов, сигналов стандартной/произвольной формы и шума Keysight 81150A

81150A

Цена: По запросу

Запросить счет

Купить

Версия для печати

Импульсный генератор произвольного шума Keysight 81150A с импульсной функцией - это высокоточный генератор импульсов, расширенный за счет универсальных возможностей генерации сигналов, модуляции и искажения, позволяющих максимально нагружать ваше устройство.

Ключевые возможности и технические характеристики

Генерация импульсов с частотой от 1 мкГц до 120 МГц с изменяемой длительностью фронта/спада
Генерация сигнала синусоидальной формы с частотой от 1 мкГц до 240 МГц
Генерация сигналов произвольной формы с разрешением 14 бит и частотой дискретизации 2 Гвыб./с
Объем памяти для сигналов произвольной формы 512 тыс. точек на канал
Генерация шума с настраиваемым коэффициентом амплитуды и периодом повторения 26 дней
AM, ЧM, ЧМн, ФМ и ШИМ модуляция с полосой до 10 МГц
1 или 2 канала, связанные или несвязанные
Дифференциальные выходы

Создание и редактирование сигналов

Программное обеспечение BenchLink Waveform Builder Pro для создания и редактирования сигналов

Предназначен для создания высококачественных сигналов

Прецизионный генератор импульсов дополнен возможностями универсального генератора, обеспечивая формирование искаженных сигналов с целью тестирования устройств в предельных режимах
Генератор кодовых последовательностей для создания идеальных и искаженных последовательностей со скоростью передачи до 120 Мбит/с
Генератор сигналов стандартной/произвольной формы обеспечивает создание сигналов сложной формы и их модуляцию для использования при тестировании различных устройств
Генератор шума обеспечивает генерацию случайного и повторяющегося шума с очень длительным периодом повторения, что упрощает идентификацию проблем

Генератор Keysight 81150A может использоваться в самых разных приложениях

Источник шума для тестирования на физическом уровне систем связи и компьютерных шин, например, MIPI и PCI Express Gen 3
Генерирование сигналов для тестирования шины FlexRay
Генерирование сигналов тактовой частоты
Системный источник сигналов синхронизации
Тестирование радиолокационных систем
Тестирование аналого-цифровых устройств
Проверка целостности сигнала

Комплектация

Certificate of calibration

Local power cord

USB cable

Product CD (User Guide, Getting Started Guide, IVI-COM driver, examples for remote access)

Номер в Госреестре	Наименование СИ	Обозначение типа СИ	Изготовитель	Срок свидетельства или заводской номер
56005-13	Генераторы сигналов сложной/произвольной формы	81150А, 81160А, 81180А, 81180В	Фирма "Keysight Technologies Microwave Products (M) Sdn. Bhd.", Малайзия; Фирма "Keysight Technologies Deutschland GmbH", Германия; Фирма "Keysight Technologies Israel", Израиль	07.11.2023

Pulse characteristics
	81150A
Frequency range High bandwidth amplifier High voltage amplifier	1 μHz to 120 MHz 1 μHz to 50 MHz
Frequency resolution	1 μHz
Pulse width Range High bandwidth amplifier High voltage amplifier Resolution Accuracy	4.1 ns to (period - 4.1 ns) typ. 10 ns to (period - 10 ns) 100 ps, 6 digits ± 500 ps ± 50 ppm
Transition time (independent rise and fall) Range High bandwidth amplifier High voltage amplifier Resolution Accuracy High bandwidth amplifier High voltage amplifier	2.5 ns to 1000 s (10% to 90%) 7.5 ns to 1000 s (10% to 90%) 100 ps, 6 digits ± 500 ps ± 50 ppm -1000 ps to +500 ps ± 50 ppm
Overshoot	2% typ.¹
1. Overshoot disappears for transitions times > 5 ns (high bandwidth amplifier) and > 15 ns (high voltage amplifier).
2. Overshoot disappears for transition times > 2 ns.
Sine characteristics
	81150A
Frequency range High bandwidth amplifier High voltage amplifier	1 μHz to 240 MHz 1 μHz to 50 MHz
Frequency resolution	1 μHz
Harmonic distortion (High bandwidth amplifier 50 Ω into 50 Ω)	1 μHz to 2 MHz 2 MHz to 10 MHz 10 MHz to 35 MHz 35 MHz to 70 MHz 70 MHz to 240 MHz	1 V_PP< -62 dBc spec. < -57 dBc spec. < -45 dBc spec. < -35 dBc spec. < -22 dBc spec.	3 V_PP< -62 dBc spec. < -52 dBc spec. < -40 dBc spec. < -30 dBc spec. < -17 dBc spec.
Harmonic distortion (High voltage amplifier 50 Ω into 50 Ω)	1 μHz to 8 MHz 8 MHz to 50 MHz	10 V_PP< -40 dBc < -25 dBc
Non-harmonic (spurious) distortion	1 μHz to 20 MHz 20 MHz to 200 MHz 200 MHz to 240 MHz	-60 dBc typ. -55 dBc typ. -50 dBc typ.
SSB phase noise (10 kHz offset) 1 MHz 10 MHz 100 MHz 240 MHz 500 MHz	-119 dBc/Hz typ. -115 dBc/Hz typ. — -93 dBc/Hz typ. —
Square characteristics
	81150A
Frequency range High bandwidth amplifier High voltage amplifier	1 μHz to 120 MHz 1 μHz to 50 MHz
Frequency resolution	1 μHz
Duty cycle High bandwidth amplifier High voltage amplifier	(Freq/240 MHz) to 1 – (Freq/240 MHz) e.g. 60 MHz; 25% to 75% (Freq/100 MHz) to 1 – (Freq/100 MHz) e.g. 1 MHz 1% to 99%
Resolution	0,1%
Transition time (10% to 90%) High bandwidth amplifier High voltage amplifier	2.5 ns typ. fixed 6 ns typ. fixed
Overshoot	2% typ.
Ramp characteristics
	81150A
Frequency range	1 μHz to 5 MHz
Frequency resolution	1 μHz
Linearity	< 0.1% (f < 10 kHz)
Symmetry	0.0% to 100%
Noise characteristics
	81150A
Bandwidth High bandwidth amplifier High voltage amplifier	120 MHz typ. 40 MHz typ.
Amplitude distribution	Selectable Gaussian, user defined
Crest factor (peak/RMS) selectable	3.1, 4.8, 6.0, 7.0 typ. (Gaussian distribution)
Noise type	Deterministic, triggerable
Repetition time	~ 26 days
Arbitrary characteristics
	81150A
DAC sample rate	2 GSa/s¹, fixed
Waveform length	2 to 512 k points
Wavelength vs. memory access rate	2 to 512 k points at memory access rate 1,000 MSa/s¹
DAC resolution	14 bits
Frequency range	1 μHz to 120 MHz
Frequency resolution	1 μHz
Transition time (10% to 90%) High bandwidth amplifier High voltage amplifier	1.7 ns typ. 5 ns typ.
Filter bandwidth High bandwidth amplifier High voltage amplifier	240 MHz typ. 80 MHz typ.
PP jitter	1 ns typ.
1. One step linear interpolation between two memory samples. DAC clock rate is 2,000 MSa/s.
2. Three steps linear interpolation between two memory samples. DAC clock rate is 2,500 MSa/s.
3. One step linear interpolation between two memory samples. DAC clock rate is 2,500 MSa/s
_{Advanced Modes}	Three advanced modes exist:
– Modulation: selects the modulation type: AM, FM, PM, FSK, PWM
– Sweep: for frequency sweeps
– Bursts: repeats selected waveform n times
Modulation
A modulation input (for AM, FM, PM, FSK, PWM) for each channel is provided on the
back-panel. In the two-channel instrument one channel can also modulate the other channel.
Modulation In 1/modulation In 2
	81150A
Input range (full scale)	Selectable ± 2.5 V or ± 5 V
Frequency range	DC to 10 MHz
Input impedance	Selectable 10 kΩ, 50 Ω nom.
Connector	BNC, back panel
AM
	81150A
Carrier waveforms	Sine, square, ramp, arbitrary
Internal modulation	Sine, square, ramp (up, 50%, down), noise, arbitrary
Modulation frequency Internal	1 mHz to 10 MHz
External	DC to 10 MHz
Depth	0% to 120%
Double-sideband suppressed carrier	Selectable on/off
Source	Internal, external, channel
FM
	81150A
Carrier waveforms	Sine, square, ramp, arbitrary
Internal modulation	Sine, square, ramp (up, 50%, down), noise, arbitrary
Modulation frequency Internal External	1 mHz to 10 MHz DC to 10 MHz
Deviation range	1 μHz to 240 MHz¹
Source	Internal, external, channel
PM
	81150A
Carrier waveforms	Sine, square, ramp, arbitrary
Internal modulation	Sine, square, ramp (up, 50%, down), noise, arbitrary
Modulation frequency Internal External	1 mHz to 10 MHz DC to 10 MHz
Deviation range	0 to 360˚
Source	Internal, external, channel
1. Max frequency depends on selected waveform.
FSK
	81150A
Carrier waveforms	Sine, square, ramp, arbitrary
Internal modulation	50% square
FSK rate Internal External	1 mHz to 50 MHz 1 mHz to 10 MHz
Frequency range	1 mHz to 240 MHz^{1, 2}
Source	Internal, external, channel
1. Max frequency depends on selected waveform.
2. For export control: Effective switching time is 40 ns.
PWM
	81150A
Carrier waveform	Pulse
Internal modulation	Sine, square, ramp (up, 50%, down), noise, arbitrary
Modulation frequency Internal External	1 mHz to 10 MHz DC to 10 MHz
Deviation range	0% to 100% of pulse width
Source	Internal, external, channel
Sweep An independent frequency sweep is provided for each channel.
	81150A
Waveforms	Pulse, sine, square, ramp, triangle, arbitrary
Type	Linear or logarithmic
Direction	Up or down
Sweep time	100 μs to 500 s
Start frequency/stop frequency	1 μs to 240 MHz³
Amplitude flatness (relative to 1 kHz, 2 V_PP)	—
Trigger source	External, internal, manual
Marker	Frequency marker
3. Max frequency depends on selected waveform.
Burst An independent burst capability is provided for each channel.
	81150A
Waveforms	Pulse, sine, square, ramp, triangle, arbitrary
Frequency	1 μHz to 120 MHz
Modes	Externally triggered, internally triggered, externally gated
# of waveforms in a burst	2 to 2³¹- 1 (~ 2 billion)
Trigger period	16.7 ns to 9999 s
Start phase⁴	–360 to +360˚
Gate source	External
Trigger source	External, internal, manual
4. Available for all waveforms except pulse, square and ramp.
Outputs
Main outputs A selectable single-ended or differential output is provided for each channel on the front-panel.
Max. frequency
	81150A
High bandwidth amplifier	120 MHz pulse/240 MHz sine
High voltage amplifier	50 MHz
Out 1/Out 2
	81150A
Output type	Single-ended or differential
Amplitude (50 Ω into 50 Ω) High bandwidth amplifier 1 μHz to 120 MHz 120 MHz to 240 MHz 1 µHz to 330 MHz 330 MHz to 500 MHz High voltage amplifier 1 μHz to 50 MHz	50 mV_PPto 5 V_PP¹typ. 50 mV_PPto 3V_PP¹typ. 100 mV_PPto 10 V_PP¹typ.
Amplitude (50 Ω into open, 5 Ω into 50 Ω) High bandwidth amplifier 1 μHz to 120 MHz 120 MHz to 240 MHz 1 µHz to 60 MHz High voltage amplifier 1 μHz to 50 MHz	100 mV_PPto 10 V_PP¹(to 9 V_PP²) typ. 100 mV_PPto 5 V_PP¹typ. 200 mV_PPto 20 V_PP¹typ.
DC amplitude accuracy	± (1.5% of setting + 5 mV)
Voltage window (50 Ω into 50 Ω) High bandwidth amplifier High voltage amplifier	–5 V to +5 V typ. –10 V to +10 V typ.
Voltage window (50 Ω into open, 5 Ω into 50 Ω) High bandwidth amplifier High voltage amplifier	–10 V to +10 V¹(-9 V to +9 V²) typ. –20 V to +20 V typ.
DC offset accuracy ± 5 V voltage window ± 10 V voltage window ± 20 V voltage window	± (25 mV + 1%) ± (50 mV + 1%) ± (75 mV + 1%)
Resolution	1 mV, 4 digits
Output impedance	Selectable 50 Ω / 5 Ω typ.
Variable load impedance	0.3 Ω to 1 MΩ³
Protection	Short-circuit protected, overload disables main output
Connector	BNC, front panel
1. All amplitudes are single-ended amplitudes. Differential peak-peak amplitudes are twice the single-ended value.
2. 10 V_PPfor 50 Ω into open; 9 V_PPfor 5 Ω into 50 Ω.
3. Current of normal Out plus current of complement Out is limited to 440 mA per channel.
4. Only for 50 Ω into open.
External reference input
	81150A
Lock range	10 MHz ± 500 ppm
Input level	200 mV_ppto 5 V_pp
Impedance	1 kΩ nom., AC coupled
Connector	BNC, rear panel
Internal frequency characteristics
	81150A
Accuracy	± 50 ppm
Stabilty	± 2 ppm, 0 to 50 ºC
Aging	± 1 ppm per year
External Input
A common external input is provided for both channels on the front panel. The external input is used for external trigger or external gate modes.
	81150A
Frequency range	DC to 120 MHz
Input range	–10 V to +10 V
Maximum input amplitude	10 V_PP
Input sensitivity	200 mV_PP
Threshold
Range	–10 V to 10 V
Resolution	100 mV
Impedance	Selectable 10 kΩ/50 Ω, DC coupled
Slope	Selectable, rising/falling/both
Pulse width	> 3.3 ns
Transition time	< 100 ns
Connector	BNC, front panel
_{Frequency counter}	The frequency applied to external input is measured
General Specifications
	81150A
Power supply	100 V to 240 V ~, 50 to 60 Hz 100 V to 127 V ~, 50 to 400 Hz
Power consumption	110 W nom.
Operating temperature	0 to 50 ºC
Operating altitude	Up to 2000 m
Storage temp.	–40 to 70 °C
Stored states	4 named user configurations and factory default
Power on state	Default or last state
Interface	2 x USB 2.0 standard A, 1 x USB 2.0 standard B, GPIB and LAN
Programming language	SCPI-1997 IEEE-488.2 LXI compliant to LXI class C (rev. 1.1)
Dimensions (WxHxD) Bench top Rack mount	439 mm x 108 mm x 456 mm 428 mm x 89 mm x 439 mm
Weight	8 kg
Safety designed to	IEC61010-1 UL61010 CSA22.2 61010.1 certified
EMC tested to	IEC61326
Warm up time	30 min.
Calibration interval	2 years recommended
Cooling requirements	When operating the instrument choose a location that provides at least 80 mm of clearance at rear, and at least 30mm of clearance at each side
Definitions
Specification (spec.)	The warranted performance of a calibrated instrument that has been stored for a minimum of 2 hours within the operating temperature range of 0 °C to 55 °C and after a 45-minute warm up period. Within ± 10 °C after autocal. All specifications include measurement uncertainty and were created in compliance with ISO-17025 and Z540 methods. Data published in this document are specifications (spec.) only where specifically indicated.
Typical (typ.)	The characteristic performance, which 80% or more of manufactured instruments will meet. This data is not warranted, does not include measurement uncertainty, and is valid only at room temperature (approximately 23 °C).
Nominal (nom.)	The mean or average characteristic performance, or the value of an attribute that is determined by design such as a connector type, physical dimension, or operating speed. This data is not warranted and is measured at room temperature (approximately 23 °C).
Measured (meas.)	An attribute measured during development for purposes of communicating the expected performance. This data is not warranted and is measured at room temperature (approximately 23 °C).
Accuracy	Represents the traceable accuracy of a specified parameter. Includes measurement error and timebase error, and calibration source uncertainty.

Подробные технические характеристики, информация производителя, брошюры:

Keysight 81150A 81160A Technical Data Sheet

Каталоги производителя:

Каталог продукции Keysight Technologies 2020.pdf

Модели	Описание	Цена
81150A	Генератор импульсов, сигналов стандартной/произвольной формы и шума	По запросу
Опции	Описание	Цена
81150A-001	One output channel for 81150A	По запросу
81150A-002	Two output channels for 81150A	По запросу
81150A-1A7	Calibration + Uncertainties + Guardbanding (Not Accredited)	По запросу
81150A-DOC	Documentation	По запросу
81150A-PAT	Pattern Generator License for 81150A	По запросу
81150A-SCD	Standard Calibration Document	По запросу
81150A-Z54	Z540.3 Calibration Documents	По запросу
81110A-1CP	Rackmount and handle kit	По запросу
81134A-PLG	Continental European power cord - ONLY FOR EU DISTR W MULT PWR CORD STANDARDS	По запросу
N6171A	MATLAB Software	По запросу
N6171A-M01	MATLAB-Basic Package, individual license - node-locked	По запросу
N6171A-M02	MATLAB-Standard Package, individual license - node-locked	По запросу
N6171A-M03	MATLAB-Advanced Package, individual license - node-locked	По запросу
R-50C-011-3	Calibration Assurance Plan - Return to Keysight - 3 years	По запросу
R-50C-011-5	Calibration Assurance Plan - Return to Keysight - 5 years	По запросу
R-50C-016-3	Keysight Calibration + Uncertainties + Guardbanding - 3 years	По запросу
R-50C-016-5	Keysight Calibration + Uncertainties + Guardbanding - 5 years	По запросу
R-50C-066-3	Poverka Service - 3 Years (for use in Russia only)	По запросу
R-50C-066-5	Poverka Service - 5 Years (for use in Russia only)	По запросу
R-51B-001-3C	Warranty Assurance Plan - Return to Keysight - 3 years	По запросу
R-51B-001-5C	Warranty Assurance Plan - Return to Keysight - 5 years	По запросу

Раздел не найден

81150A

Подробные технические характеристики, информация производителя, брошюры:

Популярные в разделе

Вы смотрели