Сеть связи/развязки высокого напряжения и грозовых перенапряжений SPN 38100T20A и 20B отвечает требованиям полного диапазона испытаний и может использоваться с S10C2000 и CWS 2000MS для испытаний различных форм сигналов. Максимальное импульсное испытательное напряжение комбинированной волны составляет 20 кВ, 10 кА, а максимальная волна тока длительностью 8/20 мкс составляет 20 кА. Соответствует источнику питания переменного/постоянного тока, максимальная нагрузка EUT составляет 380 В переменного тока, 100 А, трехфазный пятипроводный, 380 В постоянного тока, 100 А.
Номер в Госреестре | Наименование СИ | Обозначение типа СИ | Изготовитель | Срок свидетельства или заводской номер |
---|---|---|---|---|
не в реестре |
Comply with IEC 61000-4-5 lightning surge immunity test technical parameters | |
Three-phase fully automatic coupling / decoupling network |
Comply with EN/IEC 61000-4-5 , GB/T 17626.5 Lightning surge combined wave test Voltage up to 20kV ( 1.2/50 μ s ) Current up to 10kA (8/20 μ s) Note: The actual output pulse voltage value of the coupling / decoupling network depends on the setting value of the pulse generator. |
Phase synchronization | Arbitrary line - line, line - ground phase angle superposition |
coupling path |
L1 , L2 , L3 , N , any combination of lines L1 ( DC+ ), N ( DC- ) DC path |
Coupling switching method | automatic switching |
coupling capacitor | 9uF (line - ground), 18uF (line - line) |
Coupling resistance | 10 ohm (line - ground), 0 ohm (line - line) |
EUT load capacity | Max AC 380V , 100A ; Max DC 380V , 100A ; |
Residual pulse voltage at EUT injection end | Not exceeding 15% of the applied test pulse voltage or 2 times the peak rated voltage of the coupling / decoupling network |
Comply with IEC 61643-11 pulse current immunity test technical parameters | |
Manual coupling / decoupling networks |
Comply with EN/IEC 61643-11 , GB/T 18802.11 Coupled pulse current wave test Current up to 20kA (8/20 μ s) Note: The actual output pulse voltage value of the coupling / decoupling network depends on the setting value of the pulse generator. |
Output current | Up to 20kA (8/20us) |
Phase synchronization | Arbitrary line - line, line - ground phase angle superposition |
coupling path |
L1 , L2 , L3 , N , any combination of lines L1 ( DC+ ), N ( DC- ) DC path |
Coupling switching method | Manual switching |
coupling device | gas discharge tube |
EUT load capacity | Max AC 380V , 100A ; Max DC 380V , 100A ; |
Residual pulse voltage at EUT injection end | Not exceeding 15% of the applied test pulse voltage or 2 times the rated peak voltage of the coupling / decoupling network (EUT input voltage) |
Common parameters | |
Working power range | AC 110V/220V ± 10% , 50/60Hz ± 5% (domestic default AC 220V 50Hz) |
fuse | 6A |
Maximum power consumption | 200W |
Auxiliary interface | D-sub 25p |
Instrument ground connection method | Use a flat ground wire |
Cabinet size | 35U |
weight | About 200Kg per piece |
temperature range | 15-35 ℃ |
Humidity range | 45%-75% |
Air pressure range | 86kPa – 106kPa |
Подробные технические характеристики, информация производителя, брошюры:
-
Каталоги производителя: